Vibration and Position Monitor Models

Vibration and Position Monitors
Model #	Description	Operating Voltage	Filter	Setpoint	Relay Contacts	Sensor
V/P-SCF	Displacement	24 VDC	Yes	One	Form C	A1 Pickup (Internal)
V/P-SCF	Displacement	115 VAC	Yes	One	Form C	A1 Pickup (Internal)
V/P-SCV	Velocity	24 VDC	Yes	One	Form C	A1 Pickup (Internal)
V/P-SCV	Velocity	115 VAC	Yes	One	Form C	A1 Pickup (Internal)
V/P-SCD	Displacement	24 VDC	Available	Dual	Form A or B	A1 Pickup
V/P-SCD	Displacement	115 VAC	Available	Dual	Form A or B	A1 Pickup
V/P-LR2D	Displacement	24 VDC	No	Dual	Form A, B, or C	LG Probe
V/P-LR4C	Displacement	115 VAC	No	Dual	Form C	LG Probe
G/P-LR3	Axial Position	24 VDC	No	Dual	Form C	LG Probe
G/P-LR3C	Axial Position	115 VAC	No	Dual	Form C	LG Probe
V/P-SCOV2	Velocity	24 VDC	Yes	Dual	Form A, B, or C	Velocity Transducer
V/P-SCOVC	Velocity	115 VAC	Yes	Dual	Form A, B, or C	Velocity Transducer

Operating Range:	Vibration/Displacement – 0-3, 0-5, 0-10, 0-15 mils peak-to-peak/Velocity – 0-0.5, 0-1 inch/sec. Position/ 0-10-0, 0-25-0, 40-0-40 mils
Analog Output:	0-1 VDC, 0-5 VDC, 1-5 VDC, 0-10 VDC, 4-20mA analog
Time Delay:	The alarm and trip time delay are fixed: 0.5, 1, 2, 3, 5, or 10 seconds
Relay Rating:	Relays are rated 5A at 28 VDC or 115 VAC (resistive)
Contact Configuration:	Form A = normally open, Form B = normally closed, Form C = available in both normally open or closed
HSP:	Automatically increases setpoint levels by a factor 2-5 times during start-up. Prevents premature setpoint action

Riverhawk Company