Indikon Company, Inc. : How to Order : Form TQ

Marketing, Sales, and Engineering
Indikon
215 Clinton Road
New Hartford, NY 13413
Phone (315) 624-7171
Fax (315) 624-7173

Manufacturing, Quality, and Purchasing
Indikon
26 Weston Avenue
Somerville, MA 02144
Phone (617) 625-3604
Fax (617) 625-4688

Download this form in Microsoft Word Format

FORM TQ - TORQUE SYSTEM DATA - READOUT AND OUTPUT RANGES

CUSTOMER:

JOB NUMBER:

OPERATIONAL REGIMEN	SPEED	TORQUE	POWER
NORMAL
MAXIMUM
OPTIONS FOR ENGINEERING UNITS	RPM	Lb-ft; N-m; Kg-m	HP; KW
AVAILABLE NUMBER OF DIGITS NOTE: SHOW UNITS OR 1000'S SHOW DECIMAL POINT LOCATION IN READOUT RANGE TABLE	4-1/2 Digits Units (ONLY)	4-1/2 Digits Units 1000's	4-1/2 Digits Units 1000's
ANALOG OPTIONS SPECIFY 4-20 Ma OR 0-10 Volts > >>
RANGE OF PARAMETER

MAXIMUM VALUES OVER 19,999 WILL READ IN THOUSANDS OF UNITS WITH A DECIMAL POINT.

TORQUE CAPACITY: THE USER SHOULD DEFINE 'FULL SCALE' OR '100 PERCENT TORQUE' WHICH IS NORMALLY THE MAXIMUM RUNNING TORQUE FOR THE SYSTEM. THEN THE DESIGN LIMIT FOR THE INDIKON TORQUEMETER IS 125 PERCENT OF THIS 'FULL SCALE' VALUE. NOTE THAT THE POSSIBILITY OF FUTURE UPGRADES TO THE SYSTEM SHOULD BE CONSIDERED IN DETERMINING THE 100 PERCENT POINT AND HENCE THE DESIGN LIMIT.

CALIBRATION POINT: MAY BE ANY TORQUE UNDER THIS VALUE. BUT IS USUALLY THE "100 PERCENT" VALUE. TO OBTAIN A LINEARITY CURVE, CALIBRATION IS USUALLY PERFORMED AT 20 PERCENT INCREMENTS (ZERO AND 5 ADDITIONAL POINTS).

INDIKON TORQUE STAND: TO MOUNT ON THE TORQUE TEST STAND, THE COUPLING IS ATTACHED TO ADAPTER PLATES. IF COUPLING HAS A FLANGE WITH A BOLT CIRCLE, THEN HUBS ARE NOT REQUIRED FOR ASSEMBLY OR CALIBRATION OF THE TORQUEMETER.